Invelos Forums: Posts by Tyler12

Welcome to the Invelos forums. Please read the forum rules before posting.

Read access to our public forums is open to everyone. To post messages, a free registration is required.

If you have an Invelos account, sign in to post.

Page: 1

Previous Next

Message	Details
Closed loop stepper motor problem I try to connect a closed loop stepper motor to Duet2 using an expansion breakout board. Before I used a normal stepper motor with an external driver on Duet. When I use the jog command (G0) with a push button it works. When I use other commands like homing (G1) it goes wrong. The movements are not coherent and the distance is no longer correct. When I use the push button the distance is ok. Same result if I set closed loop operation with a switch. The strange thing is that the driver does not alarm for missed steps. So the driver does not see the missed steps. When I block the motor the driver alarms for missed steps. Motor and driver: https://www.oyostepper.es/goods-587-Kit-CNC-paso-a-paso-de-circuito-cerrado-de-1-eje-YE-Series-12-Nm-4A-motor-y-controlador-de-circuito-cerrado-Nema-23.html Does anyone have experience with this? Or any ideas how to solve this problem?	General->New Users Forum Posted: Topic Replies: 0, Topic Views: 65

Page: 1

Previous Next